Description
USER MANUAL
— Hendlex Glass Auto —
Preparation of surface and usage of product
The surface has to be clean, dry and oil, grease free. Apply using special Baltic Nano Technologies application cloth or applicator, buff in the surface, leave for 5 minutes and then polish with a microfiber cloth. Application temperature above +5⁰C.
Temperature must be +5⁰C – +40⁰C when coating. Keep Container always well shut. Use in a well ventilated area. Keep out of reach of children.
50 ml covers up to 10 m² surface area.
50 ml
Note! We highly recommend to use Hendlex Paint Prepare to clean the surface you going to coat Hendlex Glass Auto.
— Hendlex Leather —
Preparation of surface and usage of product
the surface must be completely clean, dry and grease free. Shake well before using. Use special Baltic Nano Technologies application cloth or applicator to gently buff in the surface and wait until dry. Indoor temperatures should be not below + 5°C temperature.
Application temperature is + 5°C + 40°C. Keep container tightly closed.
100 ml can cover 5-10 m2
100 ml
— Hendlex Antifog —
Preparation of surface and usage of product:
- the surface must be completely clean, dry and free from grease. Shake well before using. Spray evenly and buff in with a soft cloth on the surface. Indoor temperatures must not be below + 5°C temperature.
CAUTION!
- Temperature must be not less than +5⁰C when coating. Keep Container always well shut.
Covered area:
- 100 ml covers up to 15 m2 surface area.
100 ml
Note! We highly recommend to use Hendlex Paint Prepare to clean the surface you going to coat Hendlex Antifog.
Reviews
There are no reviews yet.