Description

USER MANUAL

— Hendlex Glass & Ceramic —

Preparation of surface and usage of product

The surface must be completely clean, dry and grease free. Use special Baltic Nano Technologies application cloth or applicator to apply coating to surface by polishing in applying light pressure, wait 5 minutes and polish. When applying indoor temperatures must be not lower than +5°C degrees.

After applying the surface with this product, hydrophobic (water-repellent) Nano-particle coating is formed. It facilitates cleaning of various kinds of dirt, lime and soap precipitates. There is no need to use chemical measures for cleaning surfaces. It will be easily cleaned with a damp cloth and less time will be wasted for care of surfaces.

This product prevents from reproduction of micro-organisms that are dangerous for health. Dirt does not stick to protective coating of Nano-particles. This product is not harmful to the environment.

Application:

• Glazed ceramic tiles. – The coating protects the tiles and spaces between them from formation of lime, soap and other dirt. Tiles become easy to wash off with water; there is no need to use additional expensive cleaning products. Protective coating is non-slippery and invisible.
• Ceramic sinks – Dirt spoils the surrounding view as well as it is a place where dangerous bacteria concentrate. With a help of Hendlex surface protection product, formed Nano-particle coating prevents from dirt sticking to the surface.
• Shower cabins – Coated with Hendlex product, walls of shower cabins become easy to maintain. The lime, soap precipitate is easily cleaned with a damp cloth, and thus significantly reduces the use of conventional cleaning. Furthermore, the surface remains clean without much effort.
• Refrigerators – Interior coated with Hendlex product is easily cleaned, protected from the formation of mold and from unpleasant odors.

CAUTION:

Keep container well closed. Keep out of reach of children. Use in a  well ventilated area.

Covered area:

100 ml for 20 m2

Capacity

100 ml

Note! We highly recommend to use Hendlex Paint Prepare to clean the surface you going to coat Hendlex Glass & Ceramic.

This slideshow requires JavaScript.

— Hendlex Leather —

Preparation of surface and usage of product

The surface must be completely clean, dry and grease free. Shake well before using. Use special Baltic Nano Technologies application cloth or applicator to gently buff in the surface and wait until dry. Indoor temperatures should be not below + 5°C temperature.

CAUTION!

Application temperature is + 5°C + 40°C. Keep container tightly closed.

Covered area

200 ml can cover up to 25 m2

Capacity

200 ml

This slideshow requires JavaScript.

— Hendlex Textile —

Preparation of surface and usage of product

the surface must be completely clean, dry and free from grease or oil. Shake well and spray evenly distributed on the surface. Wait until surface will get dry.

CAUTION!

Once the product has been applied for 4 hours the surface should not come into contact with water. Suitable coating temperature +5°C – +40°C. Do not use it in a higher or lower temperature! Keep container tightly closed. Keep Container protected from direct sunlight and frost.

Covered area

200 ml can cover 2-5 m2 depending on the surface.

Capacity

200 ml

This slideshow requires JavaScript.