Hendlex Shoes Protect

Description

This slideshow requires JavaScript.

— HENDLEX Suede Leather Shoes Protect —

• protects the surface from fluid and oil penetration
• it does not contain silicone, so the coated surface appears dull and does not have wet surface effect
• the product is odorless
• no volatile organic compounds

Nano impregnator for suede leather makes surface water and fat repellent.  Coating very well suits for impregnating footwear and protecting it from any dirt. Impregnated surface remains air breathable. Coating does not change color of surface.

Preparation of surface and usage of product:

Surface must be completely clean, dry and free from grease or oil. Spray evenly on the surface, until surface gets wet.  Wait until surface will get dry.

CAUTION!

Application temperature is + 5°C + 40°C. Keep container tightly closed.

Covered area:

100 ml for 2-5 pairs of shoes.

Capacity

100 ml

— HENDLEX Leather Shoes Protect —

• protects the surface from fluid and oil penetration
• it does not contain silicone, so the coated surface appears dull and does not have wet surface effect
• the product is odorless
• no volatile organic compounds

 Preparation of surface and usage of product:

Surface must be completely clean, dry and free from grease or oil. Spray evenly on the surface, until surface gets wet.  Wait until surface will get dry.

CAUTION:

Application temperature is + 5°C + 40°C. Keep container tightly closed.

Covered area:

100 ml for 10 pairs of shoes.

Capacity

100 ml

— HENDLEX Textile Shoes Protect —

• protects the surface from fluid and oil penetration 
• the surface remains breathable
• it does not change the surface color
• it does not contain silicone, so the coated surface appears dull and does not have wet surface effect
• no volatile organic compounds.

The product is ideal for:

• textile;
• fabric;
• canvas products;
• soft furnishings;
• rugs;
• coats (not suitable for synthetic products).

Preparation of surface and usage of product:

the surface must be completely clean, dry and free from grease or oil. Shake well and spray evenly distributed on the surface. Wait until surface will get dry.

CAUTION!

Once the product has been applied for 4 hours the surface should not come into contact with water. Suitable coating temperature +5°C – +40°C. Do not use it in a higher or lower temperature! Keep container tightly closed. Keep Container protected from direct sunlight and frost.

Covered area

100 ml for 2-4 pairs of shoes.

Capacity

100 ml